How to Brick Veneer a Fireplace | Ask This Old House
Ask This Old House mason Mark McCullough replaces a homeowner’s sloppy fireplace surround with a clean, thin brick veneer
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: 4-5 hours
Cost: $400
Skill Level: Difficult
Tools List for Brick Veneer: [YT]
Safety glasses [https://amzn.to/35zUZ8k]
Chisel [https://amzn.to/2pj15JD]
Hammer [https://amzn.to/31ozqo8]
Brick ruler [https://amzn.to/31ghgoj]
Trowel [https://amzn.to/32lpRaO]
Level [https://amzn.to/31e3oLb]
Tuck pointer [https://amzn.to/2MlyxZf]
Masonry brush [https://amzn.to/2MgRnjS]
Shopping List: [YT]
Thin brick [https://amzn.to/33CG77A]
Painters tape [https://amzn.to/2MiQWG4]
Thinset [https://amzn.to/2nOpYwt]
Type N mortar [https://amzn.to/2q9tuCf]
Steps:
1. Start by removing the old veneer. Take a chisel and a hammer and try to cut the thin stones until you can get the chisel behind it. Then, use the chisel and hammer to pry it off from behind. This process sends chips of stone flying, so wear safety glasses to protect your eyes.
2. Template for the new thin brick. Mark used a brick ruler to get the spacing just right and also save time, but it’s possible to also eyeball it as long as you mark each individual thin brick. Painter’s tape can be used to mark each spot.
3. Apply the thin bricks with a thinset, same as with tiling, and a trowel. Check for level every few bricks.
4. Fill in the joints with Type N mortar and a tuck pointer.
5. Brush off any excess mortar using the masonry brush.
Resources:
Mark installed General Shale French Quarter thin brick [https://amzn.to/2MhYJnd] as a veneer over the old fireplace. He ordered both flat and corner thin bricks to make sure the fireplace opening looked fully covered. He secured the veneer to the wall using Quikrete Type N mortar [https://amzn.to/2oMjy1b].
To template the brick placement, Mark used a brick ruler, which can be found at masonry supply stores.
The materials Mark used to install the thin brick, including tuck pointers, trowels, and painter’s tape can all be found at home centers.
Expert assistance with this segment was provided by the Spaulding Brick Company (https://spauldingbrick.com/).
About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. Ask This Old House helps you protect and preserve your greatest investment—your home.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House INSIDER to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: https://www.thisoldhouse.com/pages/streaming-app
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
Watch the full episode:
https://www.thisoldhouse.com/watch/radiator-fireplace-veneer-ask-toh
How to Brick Veneer a Fireplace
https://www.youtube.com/user/thisoldhouse/
📊 Video Statistics
🎧 About This Track
📖 How to Get the Most Out of This Audio
To fully enjoy "How to Brick Veneer a Fireplace | Ask This Old House", we recommend the following approach:
- Set the Scene: Find a comfortable position, dim the lights if possible, and minimize distractions.
- Use Quality Audio: Headphones or quality speakers will enhance the experience significantly.
- Adjust Volume: Keep the volume at a comfortable background level - loud enough to hear, quiet enough to relax.
- Enable Loop: Click the Loop button above for continuous play during your session.
- Try the Mixer: Use our Ambient Sound Mixer below to customize the audio with additional sound layers.
This 10:47 track is ideal for relaxation, focus, sleep. With 214.7K views, it has become a trusted choice for thousands of listeners worldwide.